Distributed by Thane Direct Canada, Toronto, Canada www.thane

Distributed by

Thane Direct Canada, Toronto, Canada www.thane.ca

Thane Direct UK, Ltd. www.thanedirect.co.uk

Made In China

U.S. Patent No. 7,152,267

U.S. Patent No. 7,340,795

Other U.S. & Foreign Patents Pending.

Fairfield, NJ 07004

C o n g ratulations and thank you for purchasing the

Cordless , the quick & agile floor and carp e t

sweeper that lets you clean dirt and messes faster and

easier than ordinary cordless swe e p e r s. The Secret:

combines the cleaning power of

Quad-Brush® Technology – powerful rotating cleaning

brushes pick up dirt and messes from all four sides of the

sweeper head – with a 360° swivel feature to easily

maneuver around furniture and other objects. It has an

extended pole, is super-lightweight and it’s bagless too!

glides effo r tlessly on four gentle floor super

sliders while its back - s aver elbow joint and low-profile design

lets you get under couches, beds and other furniture with

e a s e . Now with Touchless Dirt Tray – just push tabs to

empty for quick disposal of dirt & debris.

– 2 –

SAFETY PRECAUTIONS

• Make sure Swivel Sweeper G2 is securely assembled

before use.

• Never use Swivel Sweeper G2 clean up liquids or wet

messes, especially not flammable or combustible liq-

uids.

• Swivel Sweeper G2 contains a rechargeable 7.2V

Ni-MH (Nickel-Metal Hydride) battery, dispose of

battery properly.

• Keep fingers, hair, all other body parts and clothing

away from the rotating cleaning brushes.

• Do NOT use Swivel Sweeper G2 to clean up any

burning or lighted materials such as cigarettes, matches

and ashes.

• Do NOT use on coarse concrete surfaces.

• Do NOT use outdoors: patios, decks or rough surfaces.

• Swivel Sweeper G2's mechanical parts are not user-

serviceable. Contact a qualified professional for service.

• Make sure Swivel Sweeper G2 is turned off and that the

battery is removed, before cleaning its rotating brushes

of hair, debris etc.

• Do NOT handle or charge battery when hands are wet.

• Only use the included charger to charge Swivel

Sweeper G2's battery.

• Store your Swivel Sweeper G2 indoors in a dry,

safe place.

MAKE SURE TO COMPLETELY READ AND

UNDERSTAND ALL OF THE FOLLOWING SAFETY

INSTRUCTIONS AND WARNINGS IN THIS BOOKLET

& ON THE BATTERY CHARGER, PRIOR TO USING

SWIVEL SWEEPER G2.

– 10 – – 3 –

BASIC TROUBLESHOOTING:

1. Swivel Sweeper G2 is sluggish

or won't start:

Make sure the battery is fully charged and securely inserted

into the "Battery Compartment" and that the pole section with

the "Battery Compartment" is securely connected to the "Pole

Base." Check the "Rotating Cleaning Brushes" to make sure

they are not entangled with hair, debris, etc.

2. Battery not charging:

M a k e sure that the "Rechargeable Battery" is fully inserted into

the "Battery Charger." Also, check to make sure that the red

indicator light on the "Battery Charger" comes on when charging.

3. Rotating Brushes become bound and

sweeper shuts off:

See "Automatic Shut-Off Feature" instructions on pg. 6.

4. Swivel Sweeper G2 operating but not

picking up mess:

The "Touchless Dirt Tray" may be full. Empty out if necessary

(see Emptying The Touchless Dirt Tray Instructions on pg. 7).

Also, some debris may be lodged in carpeting (such as

staples) or may be too large/heavy for the sweeper to pick up.

Make sure the "Touchless Dirt Tray" is fully closed.

5. Dirt & Debris escaping from sweeper

during cleaning:

M a ke sure the "Touchless Dirt Tray" is empty and securely

connected to the swe e p e r. A l s o, check to see that the "Rotating

Cleaning Brushes" are not entangled with debris such as hair,

p a p e r, etc. Use the "Brush Cleaning Tool" to clean off, if necessary.

Storing Swivel Sweeper

Between Uses:

IMPORTANT: When you are

finished cleaning with Swivel

Sweeper, empty out the

"Touchless Dirt Tray," close it,

then fold the sweeper head up

to the side of the "Pole Base" to

engage the two "Magnetic

Latches," for space-saving

storage between uses

(SEE FIG. 14).

To release the sweeper head

from the "Pole Base," gently tap

it dow n .

Step 5) Replace the "Tinted Outer Body

Frame" and lock by sliding the "Outer Body

Frame Lock Clips" outward and away from

the pole (SEE FIG. 12).

Step 6) Lift the "Air Filter" up & out by its

"Removal Notch" (SEE FIG. 13). Rinse the

"Air Filter" off, let dry and replace back into

sweeper.

Periodically wipe down your Swivel Sweeper

with a dry or damp lint-free cloth. Do not use

water, liquid cleansers or abrasive materials

to clean Swivel Sweeper.

– 4 –

– 9 –

C O M P O N E N T S

1. Handle with Rotating Rubberized Hang Loop

2. Handle

3. Heavy Duty Aluminum Pole

4. Rechargeable 7.2V Battery

5. Back Saver Elbow Joint

6. Elbow Joint Lock Release Switch

7. Battery Compartment

8. On/Off Switch

9. Magnetic Latch A

10. Pole Base

11. Air Filter

12. Tinted Outer Body Frame

13. Base

14. Touchless Dirt Tray

15. Outer Body Frame Lock Clips

16. Rotating Cleaning Brushes

17. Magnetic Latch B

18. Touchless Dirt Tray

Lock Clips

19. One-Piece

Battery Charger

20. Brush Cleaning Tool

& On-Board

Storage Cover

MAGNETIC LATCH SYSTEM

FOR SPACE-SAVING STORAGE:

Swivel Sweeper’s Magnetic Latch System lets you store

your sweeper in a compact manner between uses.

FIG. 14

FIG. 12

FIG. 13

Removal

Notch

IMPORTANT MAINTENANCE & CARE:

(continued)

– 8 –

TO ASSEMBLE SWIVEL SWEEPER:

A. Upper Pole

B. Middle Pole

C. Lower Pole

D. Sweeper Head

Align the arrow on "Pole C" with the arrow

on "Sweeper Head D." When arrows are

aligned, pole will easily slide onto Sweeper

Head. Then push firmly together until pole

locks into place.

Step 3)

Step 1)

– 5 –

IMPORTANT MAINTENANCE & CARE:

As with any rotating brush cleaning device,

Swivel Sweeper’s four cleaning brushes

will accumulate fine debris such as hair,

thread and other particles. To maintain

optimal sweeper performance, clean the

sweeper’s rotating brushes of hair and

debris and its "Air Filter" of dust and dirt as

necessary following the directions below.

Step 1) Make sure the Swivel Sweeper is turned OFF and remove

the battery to ensure unit does not accidentally turn on.

Step 2) Unlock the "Tinted Outer Body

Frame" by sliding the two "Outer Body

Frame Lock Clips" inward towards the pole

(SEE FIG. 8).

Step 3) Next, lift the "Tinted Outer Body

Frame" up and over the aluminum pole to

remove it. The four rotating brushes are

now completely exposed (SEE FIG. 9).

CAUTION: Brush Cleaning Tool has sharp tip and ripping

blade. Avoid contact with tip and ripping blade.

Step 4) Use the comb side of the "Brush

Cleaning Tool" to pull up and loosen

tangled debri s . Simply guide the bl a d e

along the shaft of the "Rotating Cleaning

Brushes" (SEE FIG. 10).

Step 5) Use the other end of the "Brush

Cleaning Tool" to cut and remove tangled

debris. Simply guide the blade along the

shaft of the "Rotating Cleaning Brushes"

(SEE FIG. 1 1 ) . Dispose of debris in

garbage.

FIG. 10

FIG. 8

FIG. 9

FIG. 11

Screw "Pole A" onto

"Pole B" until secure.

Screw "Pole B" onto

"Pole C" until secure.

Step 2)

CHARGING YOUR BATTERY:

Step 1) Plug the "Battery Charger" into a

standard electrical outlet as below:

UL/cUL 120V AC 60Hz

TUV/UK 220-240V AC 50/60Hz

S t e p 2) Align the arrow on the "Rechargeabl e

B a t t e ry" with the arrow on the "Battery Charger. "

Then, insert the "Rechargeable Battery" down into

the "Battery Charger" (SEE FIG. 1 ) . N OT E : R e d

light on the front of the "Battery Charger" should

t u r n on to indicate that the battery is charging.

FIG. 1

USING SWIVEL SWEEPER:

S t e p 1) M a k e sure the Swivel Sweeper is turned off. (N OT E : T h e

"On/Off Switch" is located on the front of the "Battery Compart m e n t " ) .

Step 2) M a k e sure the "Touchless D i rt Tray" is empty (see fo l l o w i n g

directions on EMPTYING T H E TOUCHLESS DIRT T R AY ) .

S t e p 3) I n s e r t the "Rechargeable Battery" down into the "Battery

C o m p a r tment" located on the

front of the pole until it lock s

into place (SEE FIG. 2 ) .

Step 4) Tu r n the Swivel Swe e p e r

G2 on to begin cleaning.

Step 5) When you are done

cleaning, turn the Swive l

S w eeper off and empty the contents of the "Touchless Dirt Tray" into a

garbage receptacle. (See the fo l l owing instructions to empty the

" Touchless Dirt Tray.") Recharge the battery if necessary.

FIG. 2

– 6 –

– 7 –

IMPORTANT: AUTOMATIC SHUT-OFF FEATURE

Swivel Sweeper will automatically shut off to protect its moving parts

if the brushes become bound by carpets, rugs, hair or other objects.

TO RESET THE SHUT-OFF FEATURE:

1 . Place the "On/Off" switch in the "Off" position.

2 . Untangle the swe e p e r ’s brushes from the object(s) they are bound by.

Sweeper will be ready to operate within 10 minutes.

FIG. 6

FIG. 7

EMPTYING THE TOUCHLESS DIRT TRAY:

Step 1) Make sure the Swivel Sweeper is turned off.

S t e p 2) With the Swivel Sweeper "Base" over a garbage receptacle,

press and hold the "Touchless Dirt Tray Lock Clips" inward ( S E E FIG 6)

until the "Touchless Dirt Tray" swings open (SEE FIG. 7 ) .

Step 3) Empty the dirt and debris into a garbage receptacle.

S t e p 4) Then place the "Base" back on the floor or other flat surfa c e .W i t h

gentle dow n w ard pressure, snap the "To u c h l e s s D i rt Tray" closed.

I M P O R T A N T : For initial battery ch a r ge, let battery ch a rge

for at least 8 full hours . When rech a r g i n g , ch a rge time

will va r y dependent upon the amount of power that is left

in the battery after its last use. Recommended rech a r g-

ing time for the battery after completely depleting it

is 6-8 hours . B a t t e r y may be left in ch a rger for ex t e n d e d

periods of time but do NOT exceed 24 consecutive

h o u r s . Doing so may lead to shortened overall battery

l i f e. It is not necessary to wait until battery pow e r

is fully depleted before rech a r g i n g .

U S I N G T H E B A C K S AVER ELBOW JOINT FEAT U R E :

S t e p 1) To sweep under furniture, push the "Elbow Joint Lock Switch"

up towards you to unlock (SEE FIG. 3).

S t e p 2) Then push the sweeper pole down so the "Elbow Joint"

bends towards the floor (SEE FIG. 4).

Step 3) To lock the "Elbow Joint" into the starting position, pull the swe e p -

er pole back up until the "Elbow Joint" locks into place ( S E E F I G . 5 ) .

FIG. 3

FIG. 4 FIG. 5

I M P O RTA N T: If "Touchless Dirt Tray" does not secure-

ly connect back up into the "Base," check to make sure

that no small metal debris (e. g . s t a p l e s , paper clips

etc.) has magnetized to the Swivel Swe e p e r ’s motor

located on the underside of the "Base."