If the tread wears out (i.e., the tread becomes worn to 2/32” (1.59mm) shown by the tread wear indicators molded into the tread
grooves) on any of a set of four Vredestein tires in the above patterns installed on the same vehicle before the accompanying miles
(km) is reached, you will be given a credit toward an equivalent new Vredestein tire equal to the pro-rated cost of the new tire for the
difference between the miles (km) warranted and the number of miles that the original tire was used (i.e. credit = [miles warranted –
actual miles traveled] / miles warranted x current selling price of an equivalent new Vredestein tire).
To be eligible for this coverage, you must rotate the tires every 6,000 miles (9,956 km) in accordance with prescribed rotation patterns
or more frequently as recommended by the vehicle manufacturer, and you must provide evidence of rotation and maintenance
including alignment upon request. Some vehicles come from the vehicle manufacturer with “split fitments”– meaning different size
tires on the front and rear axles. As these tires cannot be rotated as recommended by Vredestein, the mileage warranty on each rear
tire will cover half the number of miles as the standard mileage warranty for that tire design.
LIMITED ROAD HAZARD REPLACEMENT PROGRAM (QUATRAC 5, QUATRAC, QUATRAC PRO, HITRAC, HYPERTRAC, ULTRAC
VORTI+, ULTRAC VORTI R+, PINZA AT P-METRIC, PINZA HT P-METRIC, SNOWTRAC 5, WINTRAC, WINTRAC PRO TREAD PATTERN
DESIGN ONLY)
You will be given an equivalent new tire, free of charge, if any tire within a set of four Quatrac 5, Quatrac, Quatrac Pro, HiTrac, Hypertrac,
Ultrac Vorti+, Ultrac Vorti R+, Pinza AT P-Metric, Pinza HT P-Metric, Snowtrac 5, Wintrac, or Wintrac Pro tires installed on the same
vehicle suffers non-repairable damage from puncture, snag, cut, bruise or impact break caused by road hazards (for example, nails,
glass, potholes, and other debris) while driving on maintained roads before the earlier of the loss of the first 2/32”
(1.59 mm) of tread depth or one (1) year from the date of purchase.
THIS IS NOT A REPRESENTATION OR WARRANTY THAT A TIRE CANNOT OR WILL NOT SUFFER NON-REPAIRABLE DAMAGE OR
FAIL IN SERVICE, INCLUDING WITHOUT LIMITATION, DUE TO PUNCTURE, SNAG, CUT, BRUISE, OR IMPACT BREAK CAUSED BY
ROAD HAZARDS. TIRES CAN AND DO SUFFER NON-REPAIRABLE DAMAGE AND FAIL IN SERVICE, INCLUDING WITHOUT
LIMITATION, DUE TO PUNCTURE, SNAG, CUT, BRUISE, OR IMPACT BREAK CAUSED BY ROAD HAZARDS, AS WELL AS OTHER
FACTORS. YOU REMAIN RESPONSIBLE FOR THE PROPER USE, MAINTENANCE, AND REMOVAL FROM SERVICE OF YOUR TIRES.
STANDARD COVERAGE (ALL TREAD PATTERN DESIGNS)
If your Vredestein-brand passenger or light truck tire becomes unserviceable as a result of any issues with materials or workmanship
within the manufacturer’s control within one (1) year from the date of purchase and before the loss of the first 2/32” (1.59 mm) of tread
depth, Vredestein will give you an equivalent new tire free of charge. If your Vredestein-brand passenger or light truck tire becomes
unserviceable as a result of any issues with materials or workmanship within the manufacturer’s control after one (1) year from the date
of purchase or after the loss of the first 2/32” (1.59 mm) of tread depth, but there remains at least 2/32” (1.59 mm) of tread depth on the
tire, Vredestein will give you a prorated credit towards an equivalent new Vredestein tire equal to the cost of the new tire times the
percentage of the original usable tread depth that remains on the tire at the time it becomes unserviceable (i.e. credit = [original tread
depth – remaining tread depth] / [original tread depth – 2/32” (1.59 mm)] x cost of the new tire).
PROVISIONS THAT APPLY TO ALL COVERAGES, TRIAL PERIODS, PROGRAMS, AND COMPONENTS OF THE WARRANTY
EXCLUSIONS FROM THE WARRANTY:
This Warranty does not cover the following tires or issues, all of which are expressly excluded from the Warranty:
• Any tires that become unserviceable due to:
o Conditions caused by road hazards, such as (i) impact break, (ii) cuts, (iii) punctures, or (iv) snags, except to the extent
covered by the Limited Road Hazard Replacement Program for the limited duration thereof, if applicable, and
subject to all limitations thereto and all other exclusions in the “Exclusions from the Warranty.”
o Conditions resulting from stone drilling, or vandalism.
o Conditions resulting from (i) improper installation; (ii) wheel misalignment; (iii) tire/wheel assembly imbalance; (iv)
use of an improper wheel; (v) improper mounting or dismount; (vi) improper repair; (vii) misapplication; (viii) use of
tire chains; or mechanical failure including without limitation failed shocks, struts, alignment, or balancing, or
contact with vehicle components including without limitation fenders, exhaust system, or springs; or
o Conditions resulting from other consumer damage, such as (i) improper tire and/or vehicle maintenance, (ii) misuse,
(iii) abuse, (iv) improper inflation, (v) overloading, (vi) over-deflection, (vii) failure to follow recommended rotation
practices, (viii) high-speed spin-up, (ix) accident, collision, impact with another vehicle or animal, fire, or chemical
corrosion, or (x) racing or competitive events.
• Ride disturbances after the first 2/32” (1.59mm) of treadwear or due to damaged wheels or any vehicle condition, or one (1) year
from the date of manufacture, whichever is first.
• Any tires that have had any material added to the tire after the tire leaves the manufacturer’s factory (e.g., tire fillers, sealants,
balancing substances, etc.).
• Any tires that are used not in full accordance with the intended use of the vehicle on which they were mounted and the
recommendations of the vehicle manufacturer.
• Any tires used outside of the United States or Canada.
• Any tires used in any commercial services (e.g., tires used for taxi service, delivery, etc.).
• Any tires stored improperly.
• Any tires installed on any vehicle other than the vehicle on which they were originally installed.
• Any tires that were acquired as used (e.g., tires purchased used, equipped on a pre-owned vehicle, etc.).
• Any tires that have been altered in any manner after leaving the manufacturer’s factory (e.g., additional siping, buffing, stud
pin holes, re-grooving, truing, etc.).
• Any tires worn to 2/32” (1.59mm) or less of remaining tread depth as shown by the tread wear indicators molded into the tread
grooves.
• Any tires with ozone or weather-cracking or weather-checking that are over four (4) years from the date of manufacture or
date of purchase.
• Any tires (8) years or older from the DOT date printed on the sidewall of the tire*
• Any tires that were original equipment tires installed on any vehicle when it left the manufacturer’s factory; and
• Any tires that were provided as replacement tires under any warranty claim.
VREDESTEIN TIRES LIMITED WARRANTY
Apollo Tires (US) Inc.| 6 Concourse Parkway, Building 6 | 29th Floor, Suite 2920 | Atlanta, GA 30328, USA
(877) 234-0867