Violet 7 in 1 Convertible Life Style Crib Manual

Adult assembly required.

Small parts may present choking hazard prior to assembly.

Enclosed please find simple step-by-step instructions to help you

quickly assemble your products. Before you begin we recommend

that you following the steps below:

1. Please read the instructions thoroughly.

2. Identify all parts and hardware.

3. You will need the following tools:

Philips head screw driver

Flat head screw driver

Hammer

Do Not Use Power Drills or Drivers

To protect your parts during assembly please place them on a soft

surface.

To clean surface use only water on a damp cloth. Do not use

window cleaners or cleaning abrasives as it will scratch the surface

and could damage the protective coating.

ASSEMBLY INSTRUCTIONS

ITEM NO: 655

Read all instructions before assembling crib.

Save instructions for future use.

655

Dream On Me Inc.

1532 S WASHINGTON AVE

PISCATAWAY TWP NJ 08854

Email: [email protected]

www.dreamonme.com

Scan the QR code to register your product

https://dreamonme.com/customercare/registration/

. Read all instructions before assembling crib, keep instructions for future use.

. Upon completion of assembly be sure all screws, bolts and fastening devices have been

securely tightened. A frequent check should be made.

. Infants can suffocate in gaps between a mattress too small or too thick and product sides,

on soft bedding never add a mattress, pillow,comforter or padding.

. CAUTION: Any mattress used in this crib must be at least 27-1/4inches(690mm) by 51-5/8

inches(1310mm),with a thickness not exceeding 6 inches(150mm), the dimensions of the

. Failure to follow these warnings and the in structions could result in serious injury or death.

.Never use plastic shipping bag or other plastic film as mattress covers not sold and

intended for that purpose, they can cause suffocation .

. Strings can cause strangulation! Never place items with a string around a child’s neck,

. Never use this product if there are any loose or missing fasteners, loose joints,broken

parts, or torn mesh/fabric. check before assembly and periodically during use.

Contact DREAM ON ME for replacement parts and instructional literature if needed.

. Never substitute parts, the product including side rails, must be fully erected prior to use.

.Discontinue use of the product when child is able to climb out or reaches the height of

.When child is able to pull to standing position,set mattress/base to lowest adjustment

positionand remove bumper pads, large toys ,and other objects that could serve as steps

for climbing out. A child can trap parts of the body or clothing on loose fasteners .

. Never use a water mattress with this product.

. If refinishing,use a non-toxic finish specified for children’s products.

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their

back to sleep, unless otherwise advised by your physician.

WARNING !

Never place product near window where cords from blinds or drapes can strangle a child.

MADE IN CHINA

35in (890mm).

mattress shall be taken from seam to seam or edge to edge where appropriate.

such as hood strings or pacifier cords. Never suspend strings over product or attach

strings to toys.

. Infants can suffocate on soft bedding .

.Never add a pillow or comforter .

. Never place additional padding under an infant .

. To help prevent strangulation tighten all fasteners.

. A child can trap parts of the body or clothing on loose fasteners.

Follow warnings on all products in a crib .

See head panel & mattress support of the product for warnings.

Replace teething rail if damaged,cracked or loose.

890

CONNECTION HARDWARE

a: 1-3/4” Allen head

bolt (12pcs)

b:Wood dowels (6pcs)

c:Allen wrench (1pc)

d:3”

Allen head bolt (8 pcs)

e:Barrel nuts (8 pcs)

f: 3/4” Allen head bolt (4 pcs)

PARTS ENCLOSED IN CARTON

A: Left head board (1 pc)

A1:Left back leg (1pc)

A3:Left board (1pc)

A2:Left front leg (1pc)

B: Right head board (1 pc)

B1:Right back leg (1pc)

B3:Right board (1pc)

B2:Right front leg (1pc)

E: Back rail bottom (1 pc)

F: Front rail bottom (1 pc) G: Mattress support (1 pc)

J:The bottom bar (1pc)

Do Not Use Power Drills or Drivers

STEP 1

Attach left back leg (A1) and

left front leg (A2) to left board

wood dowels(b).

Assemble right head board use

the same way .

STEP 2

Attach back rail bottom (E) to The right

head board (B) and The left head

board (A) using bolts(d),barrel nuts(e)

by allen wrench(c).

dna )a( stlob gnisu ) 4A()3A(

STEP 3

STEP 4

Locate the mattress support (G)

with tabs .

Be sure the smooth side of the

mattress support (G) is faced upward .

Position the tabs of the mattress

support(G) to mount to the selected

position onto the legs .

Insert the bolts (f) , through the

tabs and into thread inserts ,

then tighten securely with allen

wrench (c) .

Attach front

bottom rail (F) to The right head board

(B) and The left head board (A) using

bolts (d),barrel nuts (e) by allen

wrench (c) .

Converting crib to a toddler bed

Please note that the warning sticker is placed on the cribs to keep parents and

caregivers informed it is a requirement by law under CPSC And ASTM.

We do apologize for any inconvenience this may cause you.

(toddler rail and converting bolts are sold separately)

Failure to follow these warning and the assembly instructions could result in

serious injury or death from entrapment or strangulation. DO NOT place

bed near windows where cords from blinds or drapes may strangle a child.

DO NOT place items witha string,cord,or ribbon around a child’s neck,such

as a hood, strings or pacifier cords. DO NOT suspend strings over a toddler

bed for any reason.

WARNING

The mattress intended for use on the bed shall be a full-size crib mattress

having the dimensions of 51-5/8” (1310mm) in length and 27-1/4”(690mm) in

width and thickness of 4” (100mm) or a greater thickness as specified by the

manufacture. The minimum age of the intended user shall not be less than

15 months and the maximum weight shall not be greaterthan 50lbs(22.7kg).

FOR TODDLER BED USE

1:Remove The front rail (F )

Converting crib to a day bed

You have the option to convert crib to a day bed

2:Install the mattress support (G)

in its lowest position.

eht ot ) J(

e bottom barht elbmessa oT.3

front legs as the image showed.

Conversion kit is sold separately

You have the option to convert

crib to a full size bed I

1:Use the front rail as the

footboard of full size bed I;

2:Use the back rail as the

headboard of full size bed I;

3:Connect the front rail and the

back rail to the keyslot bedframe

which are not included and sold

separately.

Converting crib to a full size bed I

Model shown is example only.

Styles may vary .

Model shown is example only.

Styles may vary .

Converting crib to a full size bed II

Conversion kit is sold separately

You have the option to convert

crib to a full size bed II

1:Use the front rail as the

headboard of full size bed II;

2:Connect the front rail to the keyslot

bedframe which are not included

and sold separetely.

Converting crib to a Youth bed I

Conversion kit is sold separately

You have the option to convert

crib to a youth bed I

1:Use the right head board and left head

board as the headboard and footboard of

youth bed I;

2:Connect the right head board and the

left head board to the keyslot bedframe

which are not included and sold

separately.

Converting crib to a Youth bed II

Conversion kit is sold separately

You have the option to convert

crib to a youth bed II

1:Use the right head board as the

headboard of youth bed II;

2:Connect the right board to the

keyslot bedframe which are not

included and sold separately.

For youth bed,the youth mattress 29/75”

is sold separately.

LIMITED WARRANTY

workmanship and agrees to remedy any such defect.

This is solely limited to the repair or replacement of defective furniture

components and no assembly labor is included.

assembled, subjected to misuse or abuse or which has been altered or

repaired in any way.

rights which vary from State to State.

WARNING: Should this product become damaged, and/or components

are broken or missing, DO NOT USE

Enter our monthly giveaway!

Simply scan the QRcode to register.

Chat with us!

For any questions or concerns or feedback.

1532, S. Washington Avenue

Piscataway, NJ 08854

E-mail: [email protected]

www.dreamonme.com

to get your nursery featured on our social media.

@dreamonmeinc