THANK YOU
USER GUIDE
Single Pole Smart Light Switch
We appreciate the trust and confidence you have placed in Commercial Electric
through the purchase of this Smart Light Switch. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing
Commercial Electric!
Item# 1007 775 860
Model #HPSA11CWB
Safety Information
.................................................
2
FCC Regulation
..........................................
3
Wireless Protocol
............................................
5
Warranty
..................................................................
..........................................
...............................................................
.......................................................
................................................
.............................................................
5
Package Contents
5
Operation
7
Installation
10
12
13
Table of Contents
Specification
Troubleshooting
Safety Information
-2-
WARNING:
• Not compatible with standard 3-way or 4-way. Do not exceed
the load power rating limit of the device. Maximum total wattage
rating: Up to 300 total watts for LED and CFL; 600W/120V for
Incandescent/Halogen.
•
For indoor use only. Do not use in wet location.
• This product is to be installed or used in accordance with
electrical codes and regulations. If you are unsure of any part
of the instructions, consult an electrician.
• Save this instruction sheet. It contains important technical
data along with testing and troubleshooting information which
will be useful after installation is complete.
• Do not disassemble the product or make repairs yourself. You
run the risk of electric shock and voiding the limited warranty.
If you need service, or If you need assistance, please contact
Customer Service.
TO REDUCE THE RISK OF OVERHEATING AND POSSIBLE DAMAGE
TO OTHER EQUIPMENT, DO NOT INSTALL TO CONTROL A RECEPTACLE,
A MOTOR OPERATED APPLIANCE, A FLUORESCENT LIGHTING FIXTURE,
OR A TRANSFORMER-SUPPLIED APPLIANCE.
CAUTION:
NOTE:
Make sure to use this product together with 15A circuit
breaker in the upstream.
FCC Regulation
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Responsible Party
Leedarson America, Inc. 300 Technology Court SE Suite 100; Smyrna,
GA 30082 1-678-293-8382
Unique Identifier:
HPSA11CWB (SKU # 1007 775 860)
Contains FCC ID: 2AB2Q-LA02301
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and
installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
GRADATEURS COMMANDANT UNE LAMPE A FILAMENT DE
TUNGSTENE– AFIN DE REDUIRE LE RISQUE DE SURCHAUFFE ET LA
POSSIBILITE D'ENDOMMAGEMENT A D'AUTRES MATERIELS, NE PAS
INSTALLER POUR COMMANDER UNE PRISE, UN APPAREIL A MOTEUR,
UNE LAMPE FLUORESCENTE OU UN APPAREIL ALIMENTE PAR UN
TRANSFORMATEUR.
Safety Information (continued)
ATTENTION:
-3-
FCC Regulation (continued)
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communica
tions. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
—Consult the dealer or an experienced radio/TV technician for help.
-4-
Wireless Protocol
Apple and the Apple logos are trademarks of Apple, Inc., registered in
the U.S., and other countries. App Store is a service mark of Apple Inc.
Google and Google Play logo are trademarks of Google LLC.
-5-
1 YEAR LIMITED WARRANTY
Warranty
This product is guaranteed to be free of defects in
materials and workmanship for 1 year from the date of
purchase. Guarantee does not include normal wear and
tear.
Package Contents
A B C D
5003280
Part Description Quantity
A
Smart Light Switch
1
B Wall Plate 1
C
D
Screws for Light Switch
Wire Nuts
2
4
E
F
User Guide
Quick Start Guide
1
1
G
Spare Wire 1
Package Contents (continued)
E
F G
HUBSPACE APP QUICK START GUIDE
-6-
THANK YOU
USER GUIDE
Single Pole Smart Light Switch
We appreciate the trust and confidence you have placed in Commercial Electric
through the purchase of this Smart Light Switch. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing
Commercial Electric!
Item# 1007 775 860
Model #HPSA11CWB
Installation
-7-
Turn power off at the circuit breaker or fuse for the
light switch that you are replacing.
1
Remove the old light switch by disconnecting all wires.
2
3
OFF ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
NOTE:
□
□
□
□
□
Make sure that the power at the circuit breaker is off before wiring.
Neutral Wire is required. Conrm the wall box contains a Neutral Wire (Typically white).
If the wall box doesn't have a Neutral Wire, please try another location in your home or call a
professional electrician to install the switch.
The wire colors in the wall box indicated in this manual are the usual colors and may differ in
some homes.
Ensure the Wire Nuts (D) are securely fastened to each wire.
Additional instructions are available on the Homedepot.com.
Connect the new light switch wires as follows.
If the wires are different than the diagram shown,
or you are uncomfortable with the installation, call a
licensed electrician for help.
Install the single pole light switch in a single gang application.
-8-
Installation (continued)
Mount the light switch with the screws (C) and attach
Wall Plate (B).
4
B
C
Neutral
2
Live (Hot)
1
Ground
3
4
Load
-9-
Installation (continued)
Turn power ON at the circuit breaker or fuse.
Installation is complete.
5
Install the single pole light switch in a multi-gang application.
In multi-light switch installations, the reduction of the light switch’s
capacity may be required. Refer to below chart for maximum
load per light switch.
-10-
Installation (continued)
Maximum Load Per Light Switch for Multi-Gang
Load Bulb Single Two-Gang Three-Gang
LED/CFL
Incandescent/
Halogen
300W 300W 300W
600W 500W 500W
NOTE:
□
No derating is required for LED or CFL bulb applications.
Operation
NOTE:
□
□
This Hubspace product requires a 2.4GHz Wi-Fi channel. Hubspace only shows Wi-Fi networks
that your product can use.
If you do not see your Wi-Fi network name when you attempt to connect your product, please
check your router settings or move your product closer to your Wi-Fi router.
3
Connect your light switch to power and follow the
instructions on the app screen.
1
Download the Hubspace™ app from the Apple App
Store or the Google Play Store.
2
Sign in if you have an account, or register to create
an account then sign in.
-11-
4
Tap the ‘+’ button in the upper-right corner on the
app screen to add your light switch.
My Home
NOTE: Bluetooth access is required for product setup. Android phones must also
enable Location services to allow for Bluetooth scanning.
Operation (continued)
To turn your Smart Light Switch on or off, tap the On/Off button on
the Hubspace Home Page.
To set a schedule or timer, tap the name of the Smart Light Switch
on the Hubspace Home page. You will see options for setting
Schedules and Auto-Off Timers.
You can also control the light manually by pressing the button on
the Smart Light Switch.
6
Using your Smart Light Switch.
□
□
□
5
Scan the QR code on the light switch or in the Quick
Start Guide.
NOTE:
If the QR code cannot be scanned, you can enter the code manually. Tap Enter Code
and follow the instructions.
You can nd the QR code either on the front side or the back side of light switch housing.
HUBSPACE APP QUICK START GUIDE
®
-12-
Operation (continued)
7
Set up your Voice Assistant.
You can connect your Smart Light Switch to Google Home and Alexa
from the Hubspace app. Or, you can sign in to the Alexa app or Google
Home and connect to your Hubspace product from there.
Input 120VAC, 60Hz
Output
120VAC, 60Hz, Incandescent/Halogen
600W, CFL/LED 300W Maximum load
Network Wireless Type 2.4GHz, IEEE 802.11b/g/n
Operating Temperature 32° F(0°C)–104° F(40°C)
Operating Humidity 5-85% RH, Non-condensing
FCC, ETL
Specification
On:
Status LED
Click the “on”
button to
toggle light on
Off:
Click the “off”
button to
toggle light off
-13-
Troubleshooting
Problem Solution
Light or LED indicator
do not turn ON.
Circuit breaker or fuse has tripped.
Load bulb is burned out.
Neutral connection of the loading bulb is not wired.
Could not control the light.
Make sure light switch is connected to the network.
Make sure the wiring installation is correct.
Make sure your product is connected to a power
source with correct wiring. Your internet connection
or Wi-Fi network may be down.
Make sure you have a 2.4GHz capable Wi-Fi network
within range of the product you are trying to add.
My Hubspace product
is not connecting to
Wi-Fi.
any Wi-Fi networks.
My product is in a location
that does not have Wi-Fi.
Can I still use it with the
Hubspace app?
Yes. Use the app on a phone with an Internet
connection like LTE. The phone must be within
Bluetooth range of your Hubspace product and have
Bluetooth enabled.
I cannot
nd the
QR
code.
The QR code has become
damaged. How do I add the
product?
It is on the light switch housing. A copy of the QR
code is also included in your product’s documentation.
Under the QR code is a 24-digit code. You can
enter those manually instead of scanning the code.
Maximum total wattage rating:
-Up to 300 total watts for LED and CFL
-600W/120V for Incandescent/Halogen
What product can be
controlled with the
Smart Light Switch?
Loading bulb has a bad connection.
of switch.
I lost my QR code. How
do I add a product?
1. Make sure the product is connected to power.
2. In the Hubspace app, tap +, then Add Product.
3. On the Scan Product screen, tap the Search
button in the lower-right corner.
4. Follow the on-screen instructions.
A product is on another
account. How do I
transfer it?
Scan the QR code and it will transfer to your
account.
long periods of time.
Make sure your Wi-Fi signal strength is suf cient.
You may need to move your router, use mesh
Wi-Fi, or Wi-Fi extenders.
Can I scan the same QR
code to add multiple
products?
No. Each product has a unique QR code.
Problem Solution
The product is on and I
scanned the QR code,
but the app cannot
connect to it.
For Android phones, make sure Location is
enabled because it is required for Bluetooth
scanning. Turn off Bluetooth on your phone and
turn it back on. Then, scan the QR code. If the
problem persists, turn your phone off and on, then
try again.
Troubleshooting (continued)
-14-
Questions, problems, missing parts? Before returning to the store,
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-592-5233
Retain this manual for future use.
call Hubspace Customer Service
HOMEDEPOT.COM/Hubspace
