INSTRUCTION MANUAL
Please read all the instructions carefully before using this TV,
and keep the manual for future reference.
Digital LED TV
Please refer to the actual product
1
CONTENTS
Important Safety Instructions 2
Additional Safety Information 3
Preparations 4
What's Included 4
Front View 5
Rear View 6
Wall Mounting 6
Remote Control 7
Connecting External Devices 8
Customizing TV Settings 9
Turning On/Off Your TV 9
Remote Pairing 9
Setup Wizard 10
Inputs 11
Volume Adjustment 11
Get The Most Out Of Your Element Voice Remote With Google
Assistant 11
Home Page 12
TV 12
Channels 13
TV Options 14
Settings 15
Network 16
Picture 17
Sound 18
Storage & reset 19
Date & time 20
Accessibility 21
Security & resrictions 22
Parental Control 23
Troubleshooting 25
FCC Notes 28
2
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions – All the safety
and operating instructions should be read
before this product is operated.
• Keep these instructions – The safety
and operating instructions should be
retained for future reference.
• Heed all warnings – All warnings on
the appliance and in the operating
instructions should be adhered to.
• Follow all instructions – All operating
and use instructions should be followed.
• Do not use this apparatus near water
– The appliance should not be used near
water or moisture – for example, in a wet
basement or near a swimming pool, and
the like.
• Clean only with dry cloth.
• Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including ampliers) that
produce heat.
• Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not t into your outlet,
consult an electrician for replacement of
the obsolete outlet.
• Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
• Only use attachments/accessories
specied by the manufacturer.
• Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
• Unplug this apparatus during lightning
storms or when unused for long periods
of time.
• Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as the power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
• Please keep the unit in a well-ventilated
environment.
WARNING: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or
moisture. The apparatus should not be exposed
to dripping or splashing. Objects lled with liquids,
such as vases should not be placed on apparatus.
WARNING: The batteries shall not be exposed to
excessive heat such as sunshine, re or the like.
WARNING: The main plug is used as disconnect
device, the disconnect device shall remain readily
operable.
WARNING: To reduce the risk of electric shock, do
not remove cover (or back) as there are no user-
serviceable parts inside. Refer servicing to qualied
personnel.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to
the presence of non-insulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance instructions in
the literature accompanying the appliance.
This equipment is a Class II or double
insulated electrical appliance. It
has been designed in such a way
that it does not require a safety connection to
electrical earth.
Manufactured under license from Dolby
Laboratories. Dolby,Dolby Audio,and the double-D
symbol are trademarks of Dolby Laboratories.
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
3
ADDITIONAL SAFETY INFORMATION
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.
Electrical Safety
• The TV set should only be connected to a main power supply with voltage that
matches the label at the rear of the product.
• To prevent overload, do not share the same power supply socket with too many other
electronic components.
• Do not place any connecting wires where they may be stepped on or tripped over.
• Do not place heavy items on them, which may damage the leads.
• Hold the main plug, not the wires, when removing from a socket.
• During a thunderstorm, or when not using the television for extended period of time,
turn off the power switch on the back of the television.
• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet,
moist areas, such as bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if the main plug or cable
is damaged, liquid is spilt onto the set, if accidentally exposed to water or moisture,
if anything accidentally penetrates the ventilation slots or if the set does not work
normally.
• Do not remove the safety covers. There are no user serviceable parts inside. Trying
to service the unit yourself is dangerous and may invalidate the product’s warranty.
Qualied personnel must only service this apparatus.
• To avoid battery leakage, remove exhausted batteries from the remote control, or
when not using for long period.
• Do not break open or throw exhausted batteries on a re.
• Do not mix old and new batteries.
• Do not mix Alkaline,Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or
(Nickel Metal Hydride) batteries.
Physical Safety
• Do not block ventilation slots in the back cover. You may place the TV in a cabinet,
but ensure at least 5cm (2'') clearance all around.
• Do not tap or shake the TV screen, or you may damage the internal circuits. Take
good care of the remote control.
• To clean the TV use a soft dry cloth. Do not use solvents or petroleum based uids.
• Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong, the wide blade, or the third prong is provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs.
• Unplug the apparatus during lightning storms or when unused for long periods.
• Refer all servicing to a qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled, or objects have fallen into the apparatus, has been
exposed to rain or moisture, does not operate normally, or has been dropped.
• Please always connect your television to a power outlet with protective groud
connection.
4
What is Included?
PREPARATIONS
TV Set
Remote Control with Batteries
User Manual Quick Start Guide
INSTRUCTION MANUAL
Please read all the instructions carefully before using this TV,
and keep the manual for future reference.
Digital LED TV
Please refer to the actual product
QUICK START GUIDE
5
PREPARATIONS
Front View
•
Switch the TV between On / Standby mode.
• CH +/-
Press to select a channel.
• VOL +/-
Press to adjust the volume.
• LED
The LED light indicates when the TV is activated.
• IR
Infrared Receiver.
6
PREPARATIONS
Rear View
Your new TV is heavy, please consult with professional wall
mount installer to perform this installation.
WARNING
Never place a television set in an unstable location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be avoided by taking
simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
- Not placing the television set on tall furniture(for example, cupboards or bookcases)
without anchoring both the furniture and the television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located between the
television set and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television
set or its controls.If your existing television set is being retained and relocated, the same
considerations as above should be applied.
Wall Mounting
Headphone Output
HDMI Input
Antenna Input(75Ω VHF/UHF)
Optical Output
USB Input
AV/Component Input
7
PREPARATIONS
Remote Control
Voice Remote with Google Assistant
8
CONNECTING EXTERNAL DEVICES
9
Turning On/Off Your TV
CUSTOMIZING TV SETTINGS
• Connect the power cord to the power socket after you have completed all the physical
connections. At this stage, the TV will enter Standby Mode and the white LED indicator will
illuminate.
• In Standby Mode, press the
button on the main unit or on the remote control to turn the
TV on. The white LED indicator will turn blue.
• You can control your Android TV using the the included remote, the Android TV Remote app,
or the directional controller on the back of the TV. Download the Android TV Remote App to
your iOS or Android device by visiting the appropriate app store for your device.
The POWER button on the main unit or on the remote control can only
switch the TV into standby. To completely turn off the TV, please disconnect
the power cord from the power socket.
Remote Pairing
• Once you’ve connected your devices to
your television and plugged it in, insert
the included AAA batteries into the back
of the remote and press the
“power”
button on the remote. Your television will
start and after press and hold the
button on your remote for 10 seconds you
will be prompted to pair your remote with
your television. Pairing your remote to
your television is necessary because the
remote uses Bluetooth to send most button
commands and voice commands to your
television.
•
remove and reinsert the batteries in your
remote. If your remote doesn’t pair with
your TV press and hold the
button on
your remote for 10 seconds while your
television is searching for your remote.
• Once you’ve paired your remote, follow the
on-screen instructions to set up your TV.
10
CUSTOMIZING TV SETTINGS
Setup Wizard
• The rst time you turn the TV on, it will go into the Setup Wizard after remote pairing. Press
the "Navigation" buttons to highlight and select your desired mode and press "Select" to
conrm.
5
7 8
9
10
11
CUSTOMIZING TV SETTINGS
Inputs
• Press Navigation buttons on the remote control to display the Inputs menu, then use the
Navigation buttons to cycle among the different inputs: Antenna/HDMI1/HDMI2/HDMI3/
Compositie/Component/Channels, then use the Navigation buttons to highlight the desired
the Inputs menu and press Select to conrm.
• Press the VOL+/- buttons on the main unit or on the remote control to adjust the volume.
• If you wish to switch the sound off, press and hold the VOL- button on your remote to 0.
Volume Adjustment
GET THE MOST OUT OF YOUR ELEMENT VOICE REMOTE WITH GOOGLE ASSISTANT
Connect to the Internet and sign in with your Google account
Connect your TV to the Internet and sign in with your Google account to use voice commands with your
voice remote and to enjoy thousands of movies, shows, and games from Google Play, You Tube and your
favorite apps. Voice search and personalized recommendations mean more time being entertained and less
time hunting for something good.
About your Element Voice Remote with Google Assistant
Simply press and hold the Voice button and speak. Release the button when you are done speaking.
You can use your voice to change channels or search for movies, TV shows, actors, directors, apps, games,
and more.
Simply say:
• Play Stranger Things
• Show me some popular action movies from 2016
• You Tube
• What is the weather like in New York?
To learn more about voice commands you can use with your Element voice remote with Google Assistant,
visit https://support.google.com/assistant/answer/7540545.
ANDROID TV REMOTE CONTROL APP
Use your Android phone or tablet as a remote for your Android TV. Easily switch between d-pad and
touchpad modes to navigate content and play games on your Android TV device. Tap the mic to start a voice
search, or use the keyboard to input text on Android TV.
To learn more about using your phone or tablet as a remote control for Android TV, visit https://support.
google.com/androidtv/answer/6122465?hl=en.
12
CUSTOMIZING TV SETTINGS
Home Page
TV
• Press button to display the home page, then use the Navigation buttons to highlight TV
under Apps and press Select to conrm. Select between Channels and TV options.
• Press button on the remote to display the home page. Then use the Navigation buttons
to select the home page (Recommended contents/Featured apps/Apps/Inputs/Settings)
and press Select to enter. Use the Navigation buttons to select the desired APP and
press Select button to view. Or press the hotkey(YouTube/NETFLIX/Goolge Play) on the
remote control to enter the desired APP directly. You could download more apps and games
from Google Play Store. For full listing of available Apps, please visit:
https://play.google.com/store/apps/collection/promotion_3000e26_androidtv_apps_all?hl=en.
13
CUSTOMIZING TV SETTINGS
Your TV has an Electronic Programme Guide (EPG) to help you navigate through all your
possible viewing options. The EPG supplies information such as programme listings, start
and end times for all available. In addition, detailed information about the programme is often
available in EPG (the availability and amount of programme information will vary,depending on
the particular broadcast).This function can only be used when the information is broadcast by
the broadcasting companies.The EPG displays the programme details for the next 7 days.
Channels
1. Press Select button on the remote control to select the Programme Guide.
2. Use the Navigation buttons to select the station you wish to watch or listen to, then press
the Select button to tune to that station.
14
CUSTOMIZING TV SETTINGS
TV options
Advanced Option
You can also change the advanced option settings,for example Inputs
Setting/Time/Misc(at TV mode).
Note: With a different input source, the advanced option may differ.
Closed captions
Allows you to turn closed captioning of audio on or off, select analog
or digital modes, or personalize the captioning style.
Display mode
Select display mode:
Dynamic/Standard/Movie/User/PC Mode
Multi-audio A variety of voice narration.
Get more channels Get more channels from Google play
My favorite Set the selected channel as a favorite channel.
Settings
Setting channel and parental controls
• Press button to display the home page, then use the Navigation buttons to highlight TV
under Apps and press Select to conrm, then use the Navigation buttons to highlight the
desired TV options and press Select to conrm.
15
CUSTOMIZING TV SETTINGS
Settings
• Press Navigation buttons on the remote control to display the settings menu, then use the
Navigation buttons to highlight the desired settings and press Select to conrm.
16
CUSTOMIZING TV SETTINGS
Network
Wi-Fi
WIFI switch
WIFI link
See all
Display all the available
networks
Other options More settings network option.
Connect via
WPS
Connect WPS network
Add new
network
Add more new networks
• Press to display the home page, use
the
Navigation
buttons to highlight Settings
and press
Select
to conrm. Then Use the
Navigation
buttons to select Network to
enter and adjust each option setting.
17
CUSTOMIZING TV SETTINGS
Picture
Picture Mode
Cycle among picture modes:
Dynamic/Standard/Movie/
User/PC Mode.
Brightness
Increase or decrease the
amount of white in the picture.
Contrast
Adjust the difference between
light and dark levels in the
pictures.
COLOR Control the color intensity.
Sharpness
Adjust crispness level in
edges between light and dark
areas of the picture.
TINT
Adjust the balance between
red and green levels.
Color
Temperature
Cycle among color
temperatures: Cold/Nature/
Warm/User.
• Press to display the home page, use
the
Navigation
buttons to highlight Settings
and press
Select
to conrm. Then Use the
Navigation
buttons to select Picture to enter
and adjust each option setting.
18
CUSTOMIZING TV SETTINGS
Sound
• Press to display the home page, use
the
Navigation
buttons to highlight Settings
and press
Select
to conrm. Then Use the
Navigation
buttons to select Sound to enter
and adjust each option setting.
Sound mode
Allow the selection of an audio-
enhancement technique:
Standard/Music/Movie/User.
Low Pitch
Control the relative intensity of
lower-pitched sounds.
High Pitch
Control the relative intensity of
higher-pitched sounds.
Equalizer Sound effects
Balance
Adjust the relative volume
of the speaker in a multiple
speaker system.
AVC
Turn On/Off to automatically
control volume levels.
Audio
Description
The voice of the blind person
tells the motion of the audio
AD Volume
The volume of the sound of a
blind person
19
CUSTOMIZING TV SETTINGS
Storage & reset
Device storage
Device storage content
Internal shared
storage
Display Internal shared storage
Reset Select to reset setting.
Factory date
reset
Select to reset the Factory date
setting.
• Press to display the home page, use
the
Navigation
buttons to highlight Settings
and press
Select
to confirm. Then Use
the
Navigation
buttons to select Storage
& reset to enter and adjust each option
setting.
20
CUSTOMIZING TV SETTINGS
Date & time
Automatic date
& time
Automatic date and time.
Set date Set the system date
Set time Set the system timer
Set time zone Select a Time Zone
Use 24-hour
format
Select 24-hour format.
• Press to display the home page, use
the
Navigation
buttons to highlight Settings
and press
Select
to conrm. Then Use the
Navigation
buttons to select Date & time to
enter and adjust each option setting.
21
CUSTOMIZING TV SETTINGS
Accessibility
Captions
Display Captions
High contrast
text
Display High contrast text
TalkBack TalkBack is On/Off
Switch Access Switch Access is On/Off
Text to speech
Text change to speech
• Press to display the home page, use
the
Navigation
buttons to highlight Settings
and press
Select
to conrm. Then Use the
Navigation
buttons to select Accessibility to
enter and adjust each option setting.
22
CUSTOMIZING TV SETTINGS
Security & restrictions
• NOTE: Other settings also see the actual operation of the TV
Unknown
sources
Allow installation of apps from
sources other than the Google
Play Store.
Verify apps
Disallow or warn before
installation of apps that may
cause harm
Restricted
Prole
Keep secret
Create
restricted
prole
Create keep secret
• Press to display the home page, use
the
Navigation
buttons to highlight Settings
and press
Select
to conrm. Then Use the
Navigation
buttons to select Security &
restrictions to enter and adjust each option
setting.
23
Press the MENU button on the main unit or press the
on the remote control and then
press the Navigation buttons to highlight Live TV and press Select to conrm(Live TV ->
Settings -> Parent Control). Use Navigation buttons to select 4-digit password to enter
the LOCK menu. If used, this option feature can "block'' undesirable programming from
appearing on the TV. Parental Control offers the user a wide variety of options and settings
that restrict or "block'' the programming that can appear on the TV. Parental Control allows
the user the capability of defining which program rating they consider acceptable to the
younger more sensitive viewer. It can be preset and turned either on or off by the user
who species the secret 4-number code, the password. The number of hours blocked are
specified. General audiences and children blocks should be both programmed into the
TV's memory. Viewer ratings are specied for both TV and the motion picture Industry; both
rating systems should be used, for complete coverage. The ratings are based on the ages
of children.
Overview
To ensure complete coverage for all TV programs, (movies and regular TV shows) choose
a rating for MPAA, from the selections below,as well as ratings from the TV Parental
Guidelines Rating Systems below, using the Age Block option for General Audiences, and
for children. In addition to those, you may wish to add additional restrictions from the content
block menu, and submenus examples below.
Things to Consider before Setting up Parental Control
Determine which rating you consider acceptable to the viewer. (For example,if you choose
TV-PG, more restrictive ratings will be automatically blocked; the viewer will not be able to
see: TV-PG,TV-14,or TV-MA rated programming.) Do you want to block the auxiliary video
source entirely? (Blocks the signal sent by the equipment, such as VCR, connected to the
TV Audio/VIdeo Input Jacks) Or leave unblocked, then choose allowable ratings. Block
program "Content" based on individual parameters such as: Strong Dialog, Bad Language,
Sex Scenes,Violence Scenes, or Fantasy. Violent Scenes; in Content Blk option. Select a
secret password, in the Set Password option, using the numbers keys on the remote control.
Do not forget the password, it is the only way you can access the Parental Control menu
and change rating selections, or turn Parental Control off.Do you want the Parental Control
to be active at all times? If not, you can turn it on or off with the Lock On/Off option.
• You can set different Parental Control viewing restrictions for general audiences and for
children, both can be active at the same time.
• Simply specifying one content block such as Sex Scenes, will not automatically restrict
the programming that appears from the video sources.
• Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will
automatically restrict the programming that appears from the video sources.
• You can not disable Parental Control by disconnecting the TV from power. Block hours will
be automatically reset to the original block time setting specied if power is disconnected.
CUSTOMIZING TV SETTINGS
Parental Control
24
Motion Picture Association of America (MPAA) Rating System
Grade Meaning
G General Audiences Content not offensive to most viewers.
PG
Parental Guidance
Suggested
Content is such that parents may not want
their children to view the program.
PG-13
Parents Strongly
Cautioned
Program is inappropriate for pre-teens, with a
greater degree of offensive material suggested
than a PG rated program.
R Restricted
Not for children under 17, strong element of
sex and/or violence.
NC-17
No children under
age 17
Not for children under 17 under any
circumstances. Strong sexual content.
X Hard Core Films Same as NC-17 rating.
No Rating No Rating MPAA Not Rated
TV Parental Guideline Rating System
Grade Meaning
TV-Y All Children Content not offensive to most viewers.
TV-Y7
Directed to Older
Children
Considered suitable for children over 7, may
contain fantasy violence scenes.
TV-G General Audience
Considered suitable for all audience; children
may watch unattended.
TV-PG
Parental Guidance
Suggested
Suggested unsuitable for younger children,
may contain suggestive language, bad
language, sex and violence scenes.
TV-14
Parents Strongly
Cautioned
Unsuitable for children under 14, may contain
strong language, bad language, sex and
violence scenes.
TV-MA
Mature Audience
Only
Adults only, may contain strong language, bad
language, sex and violence scenes.
Canadian Rating:
• Canadian English is used throughout all English-speaking Canada (C, C8+,G, PG,14+, 18+).
• Canadian French is used in Quebec (G,8 ans+, 13 ans+,16 ans+, 18 ans+).
CUSTOMIZING TV SETTINGS
The V-Chip will automatically block certain categories that are "more
restrictive". If you block TV-Y category, then TV-Y7 will be automatically
blocked. Similarly, if you block TV-G category, then allthe categories in the
"young adult" will be blocked (TV-G, TV-PG, TV-14, and TV-MA).
25
TROUBLESHOOTING
If your TV does not operate normally or cannot be turned on, please check
the following troubleshooting questions. Remember also to check any other
connected electronic device, such as DVD or blu-ray player to pinpoint the
problem. If the TV still fails to operate normally, please contact technical support
(Refer to Warranty page).
SYMPTOM POSSIBLE CAUSE REMEDY
Dead. No LED lit No power to the TV.
• Check all connections to the
TV's AC socket.
Dead. No LED lit white Set in standby mode.
• Press either the Power button
or the Standby button on the
remote control.
Blue screen
No signal.
• Press the SOURCE button to
select the correct source.
Incorrect
source selected.
Noisy, snowy, ghosting
picture (TV)
Poor antenna signal.
• If using an indoor antenna, try
adjusting the antenna position.
Check antenna connections.
No sound
Sound "Mute". • Turn sound "Mute" off.
Volume set too low. • Check volume settings.
External leads
not connected "if used".
• Check that all external leads
are connected properly.
PASSWORD
Lost password
Select the SET Password setting in the LOCK menu, then
enter the following master password “8899”. The master
password clears your previous password and allows you to
enter a new password.
26
Before contacting the service technician, perform the following simple checks. If
any problem still persists, unplug the LED TV and call for assistance.
PROBLEM POSSIBLE SOLUTIONS
No sound and picture
• Check that the main plug has been connected to a
wall outlet.
• Check that you have pressed the POWER on the
front of the TV set.
• Check the picture contrast and the brightness
setting.
white LED indicator lights
• Set in standby mode. Press either the Power button
or the Standby button on the remote control.
Normal picture but no sound
• Check the volume.
• Sound muted? Press the MUTE button.
• Try another channel, the problem may be with the
broadcast.
• Are the audio cables installed properly?
The remote control does not
work
• Check to see if there are any objects between the
TV and remote control causing obstruction.
• Are batteries installed with correct polarity (+/-)?
• Correct remote operating mode set: TV, VCR, etc?
• Install new batteries.
Power suddenly turns off
• Is the sleep timer set?
• Check the power connection, power may be
interrupted.
• No broadcast on the station tuned.
Picture appears slowly after
switching on
• This is normal, the image is muted during the product
start up process. Please contact a service provider if
the picture has not appeared after 5 minutes.
Poor color or picture
• Adjust the color in Menu option.
•
the VCR.
• Try another channel, the problem may be with the
broadcast.
• Are the VIDEO cables installed properly?
• Activate any function to restore the brightness of the
picture.
Horizontal/vertical bars or
picture shaking
• Check for local interference, such as an electrical
appliance or power tool.
Blue screen • Press the SOURCE button to select correct source.
Poor reception on
some channels
• Station or cable experiencing problems. Tune to
another station.
• Station signal is weak, reorient antenna for better
reception.
• Check for sources of possible interference.
Lines or streaks in pictures
• Check the antenna (change the direction of the
antenna).
No output from one of the
speakers
• Adjust balance in the Menu option.
TROUBLESHOOTING
27
TROUBLESHOOTING
Note: When there is a problem in VGA mode ( only when VGA mode is applied).
PROBLEM POSSIBLE SOLUTIONS
The signal is out of range
• Adjust resolution, horizontal or vertical
frequency.
• Check whether the signal cable is connected or
loose.
• Check the input source.
Vertical bar or strip on the
background, horizontal noise
and incorrect position
• Set the auto congure or adjust clock, phase, or
H/V position.
Screen color is unstable or is a
single color
• Check the signal cable.
• Reinstall the PC video card.
Maintenance
Early malfunction can be prevented. Careful and regular cleaning can extend
the amount of time you will have with your new TV. Be sure to turn the power off
and unplug the power cord before you begin any cleaning.
Do not use your TV in areas that are too hot or too cold, because the cabinet
may warp or the screen may malfunction. Your TV works best in temperatures
that are comfortable to you.
Storage temperatures are 32° to 122°F(0° to 50°C).
Working temperatures are 32° to 95°F(0° to 35°C).
Do not place your TV in direct sunlight or near a heat source.
-minimum 5cm distances around the apparatus for sufcient ventilation
;
-the ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.;
-no naked flame sources, such as lighted candles, should be placed on the
apparatus;
-attention should be drawn to the environmental aspects of battery disposal.
Clean the screen
A great tip to dust off your screen: wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until
it’s almost dry, and then use to wipe the screen.
Make sure the excess water is off the screen, then let air-dry before you turn on
the TV.
Cleaning the cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, line-free cloth. Please
be sure not to use a wet cloth.
28
FCC NOTES
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Changes or not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
For customer support: 1-888-842-3577
Please send all correspondence to:
Element TV Company, LP. Customer Service
[email protected]
www.elementelectronics.com
This product contains electrical or electronic materials. The presence of these materials may, if
not disposed of properly, have potential adverse effects on the environment and human health.
Presence of this label on the product means it should not be disposed of as unsorted waste
and must be collected separately. As a consumer, you are responsible for ensuring that this
product is disposed of properly.